Simple Tips on How to Install Kitchen Cupboards- By: Clementine Robertson

Description : Considering the possibility of replacing your old kitchen cabinets with new ones? The thought of a skilled installing them for you has you concerned as a result of of the number of money you might should pay. That is OK; you are doing not have to possess a skilled do it. If you've got enough basic skills and the right tools you must be ready to put in them yourself.
The first and foremost factor you need to do is to carefully take away the previous kitchen cabinets. It's wise to possess somebody serving to you to try to to the entire installation of the cabinets and removing the previous ones. They'll facilitate by holding onto the cabinets when an further hand is needed. Create to not damage your walls once you take away the old ones.
Once you've got removed the recent cabinets you'll need a level and pencil to form special marks on your walls for the new cabinets. First you will need to start out a mark 3 inches from the floor and create a line upwards that's thirty four and a [*fr1] inches long. From there draw a line across the wall. This is often called the top of the bottom for the cabinets.
From now draw a line increasing nineteen and a 0.5 inches. This will represent the underside of the cabinets. The following issue you will do is to require the pencil and mark the particular dimensions of the cabinets on the wall.
You would like to search out the studs within the walls, so make sure that you've got a stud finder. With that stud finder mark all of the studs you find in the wall. Mark these studs with pencil about six inches underneath where the underside of the cabinets can be.
You will would like to make temporary support by use a piece of wood that is one by three in size and screw it into the wall where the bottom of the cabinets can be. This can be removed once you're done.
You'll now start with the corner or end cabinet and connect the back of cabinet with 2 screws. Create positive the screws are long enough to travel through the wall studs for a secure attachment. Continually check your work with the amount as you go to form sure the cupboards are level.
Once the primary corner or finish cupboard is hooked up you'll begin attaching the remainder of the cabinets. You'll attach with clamps until you're prepared to screw them together. If your cupboards have a face that is framed, you would drill a hole for one eighth inch screw and screw cupboards together. If the cupboards have a face that's unframed then you may need to drill a bolt hole and fix with bolts.
Once the regular cabinets are hooked up you'll then have to install the last finish or corner cabinet. With all of the cabinets hooked up do another visit the level. If they're found to be uneven you'll use a shim to assist level out your work. Make positive that you simply check the levelness from aspect to facet as well as back to front. Create positive that you simply place the shim where the it's uneven and fix to the wall and into the stud to assist make the cupboards level.
After all of this is often done you'll want to require one final step and that is to screw the backs of the cabinets to the wall and into the wall studs for a more secure attachment.

Article Source : http://www.look4articles.com/

Author Resource : Jeff Patterson has been writing articles online for nearly 2 years now. Not only does this author specialize in Cabinets, you can also check out his latest website about


vinylprintercutter
vinyl-lettering-machine